Specify artificial turf for commercial property by putting the construction scope, the selected product and the maintenance plan in writing. Each should describe the same intended use, rather than leaving the installer or caretaker to fill in the gaps.
A specification is a written description of the materials and work being approved. For a BC property manager or strata council, it should also make responsibilities clear. Treat the approval package as a working record for the installer and whoever maintains the property, not just a description of the finished appearance.
Match artificial turf for commercial property to its use
Start with a description of how people will use each area. Distinguish a decorative strip from a shared sitting area, a dog area or a route between doors. Mark entrances and common walking routes on a simple plan.
Record where repeated traffic will concentrate, rather than relying on the property’s resident count. A narrow gate may take constant crossings while much of an adjoining lawn sees little use. Seams should be kept out of entrances, walkways and play areas, where foot traffic parts the fibres and the join starts to show. Ask the proposed installer to explain how the product and layout address those conditions.
Include furniture and maintenance access in the discussion. Describe any mobility aids or service carts expected to cross the area, and ask a qualified professional to review suitability where needed. Do not assume every existing hard-surface route should become turf.
Where dogs will use the area, exclude weed barrier from the specification. Urine has to pass straight through the backing and into the base. A dog area also needs the next drainage level up from what the soil test alone would call for, plus access for rinsing and a named responsibility for waste removal.
Define the base and drainage scope
Separate the visible turf from the base beneath it. The base is the prepared supporting layer, and its construction should be described rather than hidden under “site preparation.” Ask what existing material will be removed and what will replace it, and require the base materials and the compaction method to be named.
Drainage needs more explanation than water passing through the turf. Water must also move through or away from the base; turf that lets water through does not, by itself, solve a drainage problem. Ask for the results of a drainage test on site. PGB’s installation guide uses the test result to choose a single, dual or triple layer base, and the soil decides the build, not the budget.
Request a plan showing where water is intended to go and which drainage work is included. Identify who investigates existing drains, who specifies any changes and who confirms completion before the base is covered. Leave site-specific drainage design to a qualified professional where necessary. See why drainage design is essential for artificial turf performance.
Contractors must contact BC 1 Call before digging and follow the locate instructions. Require the work to follow PGB installation guidelines and product instructions, with site-specific details settled before construction.
Name the product and control substitutions
Name the exact turf line, not simply “commercial artificial grass.” Attach the matching product sheet and label the selected sample with the same name. This gives the manager, installer and future caretaker a common product reference.
The PGB artificial turf range includes named lines such as Evergreen and Forest Green Elite. Treat these as products to assess against the intended use, not interchangeable colour descriptions. Confirm the selection with the PGB team rather than assuming one line suits every shared area.
List infill separately from the turf. Infill is the loose material placed between the turf fibres, and each turf has its own listed amount. For high-use shared areas, ask about Turf Armour, a quartz sand infill with a zinc-infused acrylic coating that resists packing down under repeated use. For dog areas, ask about Zeo-Odour, a natural zeolite infill. Also name the edging and seam materials, since naming the turf does not describe them.
An approved sample answers an appearance question, while the written product record identifies what should arrive. Keep both. Order the whole job at once: turf from one production run matches in colour, and turf ordered in two lots may not.
Keep substitutions subject to written approval. Request the replacement product’s documentation and review any changes to appearance or care before accepting it. PGB’s page on artificial turf for stratas and townhome complexes can help frame the discussion.
Request documentation before approval
Collect the product sheet, installation guidance and care instructions in the approval file. Match each document to the named product instead of relying on a general brochure. List unresolved questions before the council or property owner approves the selection.
Test reports are available on request. Ask PGB which reports apply to the turf under consideration, and have their relevance reviewed by a qualified professional where needed. A test report is not approval of the complete construction.
Tested to EN 13501-1. Keep the applicable documents with the other product records.
Check with the municipality, strata council or a qualified professional about project-specific requirements. Some strata bylaws and municipal rules require natural lawn in certain areas. Record who is responsible for those checks, and keep product selection and project approval as separate decisions.
Assign maintenance before the surface opens
Assign care to a named role or contracted provider before approving the project. Put the routine in writing: clear leaves and debris before they break down into the pile, power broom the surface once a year and top up infill at the same time, and twice a year for heavy use or dog areas. Rinse dog areas through with a hose once a week in warm weather.
List what must not happen on the surface: no pressure washers, no regular garden weed killer, no salt or de-icer, and nothing solvent-based. Barbecues, fire pits and cigarettes melt turf fibre, and the damage is permanent.
Agree on practical access as well as tasks. State who can use the water supply, where care equipment will be stored and how a service provider will reach the surface. Set a reporting process for lifting edges, visible seams and recurring puddles, and ask the responsible contractor to assess the cause.
Premium Grass Blades offers a turf cleaning and renewal service. Confirm the proposed service scope in writing, including what the property’s caretaker must still do between visits. Treat specialist cleaning as a defined service, not a replacement for an ongoing care plan.
Compare itemized quotes and document the handover
Give each prospective installer the same written scope and product selection. Ask for an itemized quote so the council can compare included work rather than infer it from one bundled figure. Use consistent headings:
- Removal and disposal of existing materials
- Base preparation and drainage work
- Named turf and infill, edging, seams and accessories
- Labour, site protection, cleanup and handover
Separate included work from options and exclusions. Ask how unexpected ground conditions will be documented and who must approve a scope change. Keep ongoing maintenance separate from construction so responsibility does not end unnoticed at handover.
Installation is carried out by an independent installer, not PGB. Premium Grass Blades supplies products and can refer customers to independent installers, who contract directly with the customer.
Arrange for photographs of work that will be concealed. Reviewing only the finished turf cannot show what was removed or how the base was prepared. Before acceptance, walk the site against the agreed scope. Obtain the turf and infill names, care instructions, construction records, a labelled offcut for repairs and a repair contact, then pass the same information to whoever maintains the surface.
Professional takeaway
Approve the scope, named product and maintenance responsibility together. A complete specification explains what is being built, which products are included and who will care for the surface after handover.
Related questions
What should a council receive before approving turf?
The proposed layout, named product documents, the base and drainage scope, an itemized quote and care responsibilities. List unresolved matters rather than leaving them implied.
Can a different turf be supplied after approval?
Use a written substitution process. Review the replacement product’s documents and require approval before it is ordered.
Who should handle repairs after handover?
Name a repair contact in the handover file. Separate installation-related repairs from routine cleaning, and identify who authorizes each.
Related articles
- Understanding Artificial Turf Specifications: Blade Height, Face Weight and Density
- Why Drainage Design Is Essential for Artificial Turf Performance
- Proven Maintenance Practices to Preserve Appearance, Performance and Longevity of Artificial Turf
Speak with the PGB team
Call 604-757-2899 to discuss your proposed specification. Bring the intended use and maintenance expectations into the product conversation.